Archives

Tenoning Jigs By Tom Caspar Tenoning jigs make the complicated world of mortise-and-tenon joinery a lot simpler. I’ve used a homemade wooden jig for years. I stand a rail upright on the tablesaw [...]

I added this hold-down to my tablesaw's sliding cutoff jig and find it a great convenience, because the height of the clamp is easily changed. This clamp uses a standard bar-type caulking [...]

Sharp edges and thin laminates have a way of slipping under the tablesaw fence and ruining a project—or worse. My answer is to lay a piece of 1/4-in. hardboard or plywood up against the [...]

  This handy stop grips tightly and is easy to adjust, so you can lock in crosscuts. A spacer the same thickness as the saw's auxiliary fence is the key. Sandwiched between the two clamp [...]

I love having a cutting list close at hand. But hanging on to it when both hands are busy was a problem – until I bought 24 clothespins for $2 at the hardware store. I epoxied the wooden [...]

Trying to rip sheet stock single-handedly while standing 8 ft. behind the saw is no picnic. A pair of horses the same height as your saw table carry the load and leave a path so you can easily [...]

A simple addition to my tablesaw fence allows me to cut dozens of identical odd-angled shapes in a hurry. It works just like a flush-cutting router bit. The auxiliary fence's ledge is exactly [...]

It's hard to improve on the performance of a T-square fence, but I think I've done it. I got frustrated with clamping on an additional subfence every time I wanted to make a rabbet with a [...]

  I really don't need five cordless drills, seven routers or 24 antique hand planes, but I can't help it. I'm a tool nut. Are you? Have you ever bought an old woodworking machine [...]

After years of fumbling with clamps, I decided there must be a better way to attach featherboards to my tablesaw's rip fence. Two T-tracks screwed to the fence allow me to mount a piece of [...]

Tips for Building Cabinets with Pocket-Hole Joinery New tools and improved techniques make pocket-screw assembly faster than ever. By Brad Holden Many production shops use pocket-hole joinery to [...]

Waterstones Hone an incredibly sharp edge with a $35 combo stone. By Tom Caspar For this woodworker, it doesn’t get any better than using a sharp hand tool. Not just kind of sharp, the way [...]