Archives

Tool: Groove Center Buy Now Manufacturer: Prazi MSRP: $149 A lock miter is an excellent joint for building boxes and small cases. It creates lots of surface area for glue and a tight [...]

Floor Sweep Dust Port My router table is probably the most-used tool in my shop. I have dust collector ports on the fence, but when I rout with a bearing-guided bit, it still makes a huge mess. [...]

Tool: Festool MFT/3 Multifunction Table Buy Now Manufacturer: Festool MSRP: $735 If you work in a small space, on a jobsite, or must stow all your tools when you’re done, check out the [...]

My oscillating spindle sander’s auxiliary table makes quick work of edge sanding short boards and forming perfect circles. Make the table from melamine or a laminate-covered material and fasten [...]

I devised a new way to fit a shelf into a dado. I use my router to make a tiny adjustment to the shelf’s thickness instead of fine-tuning my dado set with shims to match the plywood’s thickness. [...]

Pattern-Cut Finials The traditional way to make a square finial on a bandsaw is to mark and cut the pattern on one side of the blank, then tape the offcut back on to the blank in order to guide [...]

Staple Set Pneumatic staplers don’t always set 1/4” crown staples flush.  Driving them the rest of the way with a hammer causes the staples to kink,  so I designed this easy-to-make tool, which I [...]

Being an impatient sort, waiting for glue to reach the bottle’s spout became a pet peeve of mine. To put an end to this, I made a stand with a hole in the top matching the diameter of the [...]

There’s never enough storage space in a shop, is there? When I recycled some old kitchen cabinets to use in my shop, I added one more drawer to each one—in the toe-kick space.

Years ago, I made a corner cupboard from black walnut. I thought the wood was magnificent, but a can of rusty cut nails I used in building it proved to be far more important, taking me on an [...]

To make a quick and easy drying rack, or to raise a project off your bench while applying a finish, use blocks of rigid foam insulation and drywall screws. For stability, the screws should be no [...]

The thought of emptying my dust collector’s plastic bag used to make me cringe. Many times I’d go through my entire repertoire of colorful language two or three times, and that darn bag still [...]