Archives

The cutters in my bench planes all have cambered irons. The jack has the most – a 10” radius curve – followed by the much slighter curves of my jointer and smoothing planes. The curves do two [...]

Flush-cutting saws are great, except when you have heavy work to do, or the saws dive into the work below the teeth, or they bend because you got too aggressive. I usually use these specialty [...]

When I bought my first Stanley No. 5 in the mid-1990s, I regularly used the lever cap as a screwdriver to adjust the tension screw in the center of the frog and to tighten and loosen the cap iron [...]

For those of you who think that sanding and abrasive technology is a fairly new thing, I have news. Sanding is older than handplaning. As Geoffrey Killen points out in “Egyptian Woodworking and [...]

Handplanes that secure the cutter with a wedge need to be adjusted with a series of taps from a mallet or a hammer. The principles below apply broadly to all wedged planes, whether it’s a wooden [...]

Sticking boards are an excellent benchtop appliance when cutting mouldings by hand. A proper sticking board is an L-shaped device that holds the wood you want to “stick” (the old fashioned term [...]

One of the little challenges for beginning handplane users to get a clean surface at the start of the cut, particularly with a smoothing plane. They push the tool forward and it leaves little [...]

I sharpen all of my plane irons and chisels at 35°. Here’s why: I do this to keep my sharpening regimen as simple as possible. I don’t want to pick up a tool and wonder: What angle is this [...]

During the last few months I’ve been revising “Handplane Essentials,” an out-of print book that we published while I was the editor at Popular Woodworking Magazine. The revisions, additions and [...]

I’m building a pair of Roman workbenches in my shop that I’ll be demonstrating at Woodworking in America this fall (Sept. 16-18 in Covington, Ky.). This will be my only public appearance in 2016 [...]

When I build a piece for a customer I show them the drawing and build it (mostly) to the print. But when I build a spec piece, such as this modern campaign chest, the customer is my eyeballs. And [...]

Seasoned, well-dried wood is good, but not for all things. For the last two years I’ve been editing a book called “Woodworking in Estonia,” which is about the pre-industrial woodworking cultural [...]