Projects

Tablesaw Tapering Jig I recently built a pair of garden benches that required several identical parts that were tapered on both sides. To make the job easier, I built this jig that worked for [...]

        Here’s a quick and easy way to align your tablesaw fence with your miter slot. Plane down a board until it fits into your miter slot without play. Now slide the [...]

Pivoting Outfeed Support I recently saw an outfeed stand that had a pivoting top. The pivoting action prevents a workpiece from catching the front edge of the outfeed top. Instead, the top just [...]

Rigid Routing Sled A routing sled is a great help when coping the ends of rails and stiles. But I had a problem when I built my first sled. The pressure from the toggle clamp caused the [...]

Anti-Slip Dust-Collection Table Here’s a pair of sanding helpers that work great together. The rug pad provides a soft anti-slip surface. The Peg-Board, combined with the holes in the rug pad, [...]

          It seems like I’m always misplacing my push sticks, blade wrench, featherboards and other small tablesaw accessories. To solve my problem I added a [...]

        Here’s my solution for storing skinny things like wood trim and edge banding. I bought a 12-in.-dia. by 8-ft.-long cardboard concrete form at a home center for [...]

        Fifty bucks and a few hours is all it takes to put together this finishing booth. It keeps overspray off my tools and dust off my projects. Since I use waterborne [...]

Staining Pine Make this inexpensive wood look like a million bucks. By Tim Johnson Purchase the complete version of this woodworking technique story from AWBookstore.com. 1. Brush on two generous [...]

  One last molding to mill. I install this ogee bit in the router table and I align the fence barely in front of the bearing. Used in the router table, the bearing should not touch the [...]

Basic HVLP Spray Techniques How to succeed at spraying a waterborne finish. By Jon Stumbras   When it comes to finishing, we’re all looking for easy answers that give professional results. [...]

    I recently needed a jig to trace lathe turnings. I tried a variety of designs but none produced the accuracy or ease of operation that I wanted.    While rummaging around [...]