Techniques

Thanks for all the great comments! Congratulations to “sadkins” the winner of this book giveaway. Stay tuned for more exciting book giveaways and if you’re interested in theFurniture Fundamentals [...]

My last several posts have been about how the BARN workbench vise chops were designed. In this post, I’ll show you how the CNC was programmed for machining with CAM software. I use RhinoCAM [...]

Get some splitting leverage with this simple contraption. by Peter Follansbee Reach for a froe, and you should immediately think, “Give me a brake.” The brake can be a constructed workholding [...]

Thanks for all the great comments! Congratulations to “terrynjon” the winner of this book giveaway. Stay tuned for more exciting book giveaways and if you’re interested in a copy of “With Saw, [...]

In my last few posts, I showed how two different vise chops designs were created for the BARN workbenches. One technique was based on an easy to use 3D CAD tool: extrusion. Armed with a squiggly [...]

Thanks for all the great comments! Congratulations to “Stufeg” the winner of this book giveaway. Stay tuned for more exciting book giveaways and if you’re interested in a copy of “The [...]

So far, I have successfully avoided upholstery in my woodworking projects. As a newer woodworker, there has been so much to learn and practice that I haven’t convinced myself that I should [...]

In my last post, I used Rhino3D CAD software to create a 3D ripple for one of the BARN Workbench vise chops. 3D drawing tools were used to take a simple squiggly line and revolve it around a [...]

Thanks for all the great comments! Congratulations to “Mac” the winner of this book giveaway. Stay tuned for more exciting book giveaways and if you’re interested in a copy of “Classic [...]

In earlier posts, I used CAD software to create the 2D design for the BARN Workbench vise chop and the I built a pin registration board for two-sided machining on my CNC. Rather than a square and [...]

I find myself needing a lot of small circles for use on wooden toys. When I cut those disks out with a circle-cutting jig on the band saw, the edge is a little too rough, so I’ve made a fixture [...]

Thanks for all the great comments! Congratulations to “Loxmyth” the winner of this book giveaway. Stay tuned for more exciting book giveaways and if you’re interested in a copy of “The [...]