Tricks of the Trade

I use bench holdfasts because they’re so convenient and provide such a tremendous amount of clamping force. However, in the process, they can mar workpieces, especially softwoods. The traditional [...]

How do you know when your miter gauge is set exactly at 90°? Here’s a method I learned years ago, before I could afford a precision square to check the cut. You’ll need a 24″ [...]

The blade of a marking gauge must be as sharp as a scalpel in order to cut a fine line across the grain. Sharpening it can be very difficult because it’s so small. I solved that problem by [...]

Accurately drilling an angled hole with a hand drill is a challenge – particularly if you’re using a brad point or Forstner bit. This angled drilling guide solves the problem handily. The [...]

When using my miter saw, I’ve found that the easiest way to sneak up on a line is to use a stack of sticky notes. First, set a stop block to cut your part slightly oversize (1/16″ is [...]

After brushing the first coat of finish on my shelf project, quite a bit remained in the disposable cup. I didn’t want to pour it back, because that would contaminate the fresh finish that [...]

Gambler’s Micro-Adjust Precise fence adjustments are a sure bet when I clamp this shop-made device on my router table. I simply drilled and tapped a hole to accept a 1/4″-20 machine screw [...]

While turning wooden pens, students in my woodshop classes kept wearing out the points on the live centers of our mini lathes. The points fit into the hollowed end of the pen mandrel. If the [...]

Small logs from a local downed tree are a great windfall of free lumber for small projects. They’re easy to saw into boards on the band saw once you have established a couple flat reference [...]

I like to buy used electric motors for powering various tools around the shop. I also use them to mount grinding wheels, wire brushes and buffing wheels. I typically outfit the motors with toggle [...]

I always sign my work, now that I’ve figured out an easy and permanent way to do it: I use an engraver. But not just any engraver—it has to have an adjustable stroke (the distance the tip moves [...]

Filling knots with colored epoxy usually works quite well, but sometimes the void is in a spot that’s difficult to fill, like the edge of a board. Here’s how to do it. First, apply some paste wax [...]