Tricks of the Trade

Before the advent of magnetic-based LED lights, many of us used flexible gooseneck lamps with an incandescent bulb as auxiliary lights on our drill presses and band saws. These lamps were usually [...]

Mice used to rule my shop. They got into everything! That all changed when someone told me that fresh mint repels mice. Mint grows wild in one corner of my yard (it’s a perennial and comes back [...]

Chamfering an edge with a block plane is often easier, faster and safer than using a router or tablesaw—particularly on a small part. I do it so often that I’ve dedicated one of my planes for the [...]

How do you know if the table on your drill press is square? Not more-or-less square, but precisely square? I’ve adopted an old machinist’s trick, using a very simple jig. To make it, you’ll need [...]

Here’s a simple way to sharpen chisels using a 3″ sanding drum mounted in an oscillating spindle sander or a drill press. Cut a squared-up 2×4 the length of the sander’s table. Cut a [...]

Dust is a real problem when you can’t use a router table’s fence and its dustport. Here's a clever way to suck up that dust using your shop vacuum's nozzle.

My lathe came with a lamp, but the lathe’s manual has this weird warning: “Position the work lamp so that wood chips do not accumulate inside the lamp shade and pose a fire hazard.” Now, [...]

For small cabinets, I prefer to use small, discreet shelf pins that I make myself. I also make sleeves for the pins to fit into. Sleeves help hold the pins firmly in place. I make the pins from [...]

Flush-cutting dowels, corner keys or screw-hole plugs used to frustrate me because my saw’s teeth always left scratches on the project’s surface. Rather than buy a special flush-cutting saw, I [...]

I used to have three shooting boards for planing end grain: one for 90° cuts, one for 45° horizontal miters and one for 45° vertical miters. Now I’ve combined them all into one. The jig’s main [...]

An F-style clamp works well for getting into tight spaces, but how do you turn the handle? The answer: Just drill a couple of holes through it and insert a screwdriver. A 90° offset to the holes [...]

While staring at the pile of assorted hardware I just accidentally spilled onto my sawdust-covered floor, my thoughts quickly turned from banging my head against the wall to patting myself on the [...]