Archives

Two methods to create a mirror-flat surface. By Bob Flexner Page: 54 From the August 2010 issue #184

The modern term “butcher block” probably originated from the large, heavy chopping blocks found in old-fashioned butcher shops, which consisted of thick square boards (such as [...]

When a customer asked me to replicate the finish on her antique Stickley sideboard for the pieces she had commissioned, I grabbed my yellow dye and a few gel stains, because I knew that a layered [...]

“What kind of wood is this?” In my work as a furniture restorer and conservator, I often hear this question. Red alder is especially hard to identify because it can be finished to closely [...]

We may receive a commission when you use our affiliate links. However, this does not impact our recommendations. A local company was hired to finish some restaurant tables and called me to ask [...]

A former student of mine from 10 years ago emailed me with a question about what he remembered was a formula I had come up with for a wipe-on finish. He had looked in his notes but couldn’t find [...]

A finishing topic that gets far too little coverage is aerosol finishing. Aerosols are widely available in four common finishes: lacquer, oil-based polyurethane, water-based finish and shellac. [...]

If you’ve done much woodworking, it’s very likely that you have experienced some dents and gouges. Both are flaws in the wood. But they are not the same thing, so they should be treated [...]