Archives

When making tenons for breadboard ends and other wide workpieces, the router is my tool of choice. Ensuring perfectly aligned rabbet shoulders on both sides of the board was a problem until I [...]

These simple shop-made helpers will make marking less of a chore. Marking out dovetails for hand cutting goes much easier with these helpers. Held in place while hooked over the end of a board, [...]

When I first started teaching the 8th-grade stool-making class, I needed to find an easy method for my students to mark the leg length accurately before trimming them to a parallel surface with [...]

Crosscut sleds have been around for a long time, but few are ideal. Many are heavy and hard to store. Most develop an extra-wide saw cut in the fence and allow the blade to throw sawdust in your [...]

I used to have three shooting boards for planing end grain: one for 90° cuts, one for 45° horizontal miters and one for 45° vertical miters. Now I’ve combined them all into one. The jig’s main [...]

I wanted to rout some shelf dados, but I didn’t have the correct-size bit for the job. Fortunately, my dad stopped by and, as usual, had the answer to my problem. We cobbled up a couple L-shaped [...]

Instead of measuring for my circular saw’s offset each time I need to make a cut, I use a modified edge guide. I screwed two 3/4″ x 3/4″ x 12″ hardwood blocks to the front and [...]

This millwork technique can be used to make curved parts with accuracy and ease. Much of my recent work has been making period-appropriate arch-top sash windows for an historic building. They are [...]

My crosscut sled is my “go-to” jig for precise, square cuts. Recently, I added this self-adhesive tape scale – called Peel-n-Stick Ruler Tape – that makes it even more efficient. You [...]

Here is my adjustable jig for ripping thin strips on a table saw. Used with a push stick and zero-clearance insert, it keeps my hands a safe distance away from the sawblade. The base is MDF [...]

I find cutting dowels on the band saw to be a hassle. For one thing, the blade can grab the round stock and twist it out of your hand if you’re not using a support cradle guided by the miter …

A notched batten is one of the best jigs you can make to help in hand planning. This simple thin hardwood strip has a hoof-shaped notch at its end and is used to prevent boards from shifting [...]