Archives

My flush-trimming setup allows trimming veneer and solid wood edging up to 7/8-in. thick. It consists of a router with a 1/2-in. straight bit, a table and a perpendicular fence. A 1″-thick [...]

I’ve found that padding my vise faces with cork prevents them from marring many surfaces, especially softer woods or finished workpieces. I use 1⁄4“-thick cork, which is available by the [...]

I use a piece of painter’s tape to mark dadoes when I assemble cabinets. Then I know exactly where to shoot nails or install screws and there aren’t any pencil lines to sand off when I’m [...]

I felt like I won the storage-space lottery when I came up with this bench design for my shop. I wanted a way to store lumber and my benchtop tools. The backbones of this bench are the 2 x 4 …

When my bench’s tool tray fills up with sawdust and hardware, I’ve found that the easiest way to clean it is to use a vacuum. To keep the hardware from going into the vacuum, I cover [...]

If you use a cyclone dust collector, you’ve no doubt struggled with emptying the barrel. When it’s filled with dust, it’s really heavy, not to mention the face full of dust you [...]

Establishing Depth Reference A recent project required making a series of small wooden panels with shallow concave faces. For efficiency and accuracy, I decided to make a series of preliminary [...]

Large plastic boxes, the kind that restaurants use for bussing dishes, are perfect for shop drawers. They’re strong, durable and lightweight, plus they have built-in handles. They’re perfect for [...]

I don’t use my machinist’s vise often enough to dedicate any of my limited bench space to it. Instead, I keep it tucked under a nearby cabinet for occasional use. I bolted the vise to a board [...]

I’m a great fan of aerosol finishes, especially now that many of them have adjustable tips that make much less splatter. But my shop got so cluttered with half-used cans that I had trouble [...]

The strong adhesive and tough plastic of packaging tape allow it to work as a hinge on long, mitered corners. After carefully cutting the miters, lay the boards outside-face up and side by side [...]

My tight finances forced me to devise an alternative to an expensive bench vise. This simple leg vise – cobbled together from a board, a 3⁄4“-diameter pipe clamp, and a short length of [...]