Archives

Before the advent of magnetic-based LED lights, many of us used flexible gooseneck lamps with an incandescent bulb as auxiliary lights on our drill presses and band saws. These lamps were usually [...]

Mice used to rule my shop. They got into everything! That all changed when someone told me that fresh mint repels mice. Mint grows wild in one corner of my yard (it’s a perennial and comes back [...]

Chamfering an edge with a block plane is often easier, faster and safer than using a router or tablesaw—particularly on a small part. I do it so often that I’ve dedicated one of my planes for the [...]

Here’s a simple way to sharpen chisels using a 3″ sanding drum mounted in an oscillating spindle sander or a drill press. Cut a squared-up 2×4 the length of the sander’s table. Cut a [...]

Dust is a real problem when you can’t use a router table’s fence and its dustport. Here's a clever way to suck up that dust using your shop vacuum's nozzle.

My lathe came with a lamp, but the lathe’s manual has this weird warning: “Position the work lamp so that wood chips do not accumulate inside the lamp shade and pose a fire hazard.” Now, [...]

For small cabinets, I prefer to use small, discreet shelf pins that I make myself. I also make sleeves for the pins to fit into. Sleeves help hold the pins firmly in place. I make the pins from [...]

Flush-cutting dowels, corner keys or screw-hole plugs used to frustrate me because my saw’s teeth always left scratches on the project’s surface. Rather than buy a special flush-cutting saw, I [...]

Shellac is a mainstay in my shop, both as a sealer and as a finish. I mix my shellac from flakes and usually go with a 1 lb. cut, which is ideal for brushing ultra-smooth coats. I used to measure [...]

Having grown tired of bending and tearing sheet sandpaper again and again to get the size I need, I finally decided to employ the time-honored trick of cutting it with a hacksaw blade screwed to [...]

The limited crosscut capacity of my cabinet saw made it a challenge to cut wider boards, so I designed an infeed table that hangs on a wall when not in use and quickly and securely attaches to [...]

Instead of measuring for my circular saw’s offset each time I need to make a cut, I use a modified edge guide. I screwed two 3/4″ x 3/4″ x 12″ hardwood blocks to the front and [...]