Archives

Gambler’s Micro-Adjust Precise fence adjustments are a sure bet when I clamp this shop-made device on my router table. I simply drilled and tapped a hole to accept a 1/4″-20 machine screw [...]

While turning wooden pens, students in my woodshop classes kept wearing out the points on the live centers of our mini lathes. The points fit into the hollowed end of the pen mandrel. If the [...]

Small logs from a local downed tree are a great windfall of free lumber for small projects. They’re easy to saw into boards on the band saw once you have established a couple flat reference [...]

I recently came across another handy solution to prevent jaw-racking when clamping a workpiece on the side of a vise. Most parallel vises tend to rack in such scenarios, but there are situations [...]

I like to buy used electric motors for powering various tools around the shop. I also use them to mount grinding wheels, wire brushes and buffing wheels. I typically outfit the motors with toggle [...]

I always sign my work, now that I’ve figured out an easy and permanent way to do it: I use an engraver. But not just any engraver—it has to have an adjustable stroke (the distance the tip moves [...]

Filling knots with colored epoxy usually works quite well, but sometimes the void is in a spot that’s difficult to fill, like the edge of a board. Here’s how to do it. First, apply some paste wax [...]

Before the advent of magnetic-based LED lights, many of us used flexible gooseneck lamps with an incandescent bulb as auxiliary lights on our drill presses and band saws. These lamps were usually [...]

Mice used to rule my shop. They got into everything! That all changed when someone told me that fresh mint repels mice. Mint grows wild in one corner of my yard (it’s a perennial and comes back [...]

Chamfering an edge with a block plane is often easier, faster and safer than using a router or tablesaw—particularly on a small part. I do it so often that I’ve dedicated one of my planes for the [...]

How do you know if the table on your drill press is square? Not more-or-less square, but precisely square? I’ve adopted an old machinist’s trick, using a very simple jig. To make it, you’ll need [...]

Here’s a simple way to sharpen chisels using a 3″ sanding drum mounted in an oscillating spindle sander or a drill press. Cut a squared-up 2×4 the length of the sander’s table. Cut a [...]